Product Details:
Payment & Shipping Terms:
|
Name: | Overlapping Wave Spring Washers | Length: | Non-standard As Request&design |
---|---|---|---|
Non-standards: | OEM Is Available If You Provide A Drawing Or Sample | Sample: | Free(If There Is Ready-made Goods) |
Product Standards: | GB,DIN,BS,ISO,JIS,ANSI,UNC | Packing: | Inner--PE Bag; Outer--Carton Box |
High Light: | Overlapping Wave Spring Washers,Flat Wire Wave Spring Washers,OEM Compression Single Turn Wave Spring |
Customized flat wire compression Overlapping wave spring washers sizes
Material Finishes:
1.Passivation
Passivation is an optional cleaning operation for stainless steel. It provides a bright finish and increased corrosion resistance. Passivation dissolves iron particles and other substances, which have become imbedded in the surface of stainless steel during production. If not dissolved, these foreign particles could promote rusting, discoloration or even pitting.
2.Vapor Degrease/Ultrasoni
This is the standard cleaning and finish for all stainless steels. The process removes oil and other organic compounds from the material surface by use of a chlorinated solvent. The solvent effectively removes oil and grease from the exposed surfaces of the ring or spring. Ultrasonics are used in forcing the solvent to act between the turns of the ring.
3.Vibratory Deburr/Hand Deburr
Though all circumferential surfaces and edges of Spirolox Rings are smooth, sharp corners are always present on the gap ends due to the cut-off operation. To break the sharp corners, achieving a blended/smooth surface finish, rings may either be vibratory or hand deburred to meet your specifications.
Specification:
Part No. | Operates in Bore Diameter |
Lears Shaft Diameter |
Load | Work Height | Free Height | Waves | Thinkness | Radial Wall | Spring Rate | Open mode |
mm | mm | (N) | mm | mm | mm | mm | N/MM | |||
JBT-042 | 42 | - | 205-295 | 1.5 | 2.7 | 4 | 0.53 | 3.63 | - | overlap |
LB-0165 | 42 | 33.72 | 115.7 | 1.98 | 3.05 | 4 | 0.46 | 3.63 | 99 | overlap |
LR-0175 | 44.45 | 36.58 | 133.36 | 1.98 | 3.56 | 4 | 0.46 | 3.63 | 84.7 | gap |
JBT-047 | 47 | - | 225-315 | 1.5 | 3.4 | 4 | 0.59 | 3.23 | - | overlap |
LB-0185 | 47 | 38.72 | 129 | 1.98 | 3.81 | 4 | 0.46 | 3.63 | 68 | overlap |
LR-0187 | 47.63 | 39.62 | 142.25 | 1.98 | 3.81 | 4 | 0.46 | 3.63 | 77.7 | gap |
LR-0200 | 50.8 | 42.67 | 151.14 | 2.36 | 3.56 | 4 | 0.61 | 3.81 | 126.53 | gap |
LB-0453 | 115 | 101.38 | 315.9 | 3.18 | 6.35 | 5 | 0.76 | 5.92 | 99 | gap |
LR-0462 | 117.48 | 104.39 | 324.51 | 3.18 | 6.86 | 5 | 0.76 | 5.92 | 88.03 | gap |
LR-0462-N | 117.48 | 106.43 | 324.51 | 3.18 | 6.86 | 5 | 0.76 | 4.78 | 88.03 | gap |
JBT-120 | 120 | - | 515-625 | 2 | 5.8 | 6 | 0.76 | 4.78 | - | gap |
LB-0472 | 120 | 106.38 | 329.3 | 3.18 | 7.11 | 5 | 0.76 | 5.92 | 86 | gap |
LR-0475 | 120.65 | 107.7 | 333.4 | 3.18 | 7.87 | 5 | 0.76 | 5.92 | 70.88 | gap |
LR-0475-N | 120.65 | 109.73 | 333.4 | 3.18 | 8.13 | 5 | 0.76 | 4.78 | 67.38 | gap |
LR-0487 | 123.83 | 111 | 337.84 | 3.18 | 7.37 | 5 | 0.76 | 5.92 | 80.68 | gap |
LR-0487-N | 123.83 | 112.78 | 337.84 | 3.18 | 8.13 | 5 | 0.76 | 4.78 | 68.25 | gap |
JBT-125 | 125 | - | 515-625 | 2 | 6.2 | 6 | 0.76 | 4.78 | - | gap |
LB-0492 | 125 | 111.38 | 342.6 | 3.18 | 7.62 | 5 | 0.76 | 5.92 | 76 | gap |
LR-0500 | 127 | 114.05 | 346.73 | 3.18 | 7.87 | 5 | 0.76 | 5.92 | 73.85 | gap |
LR-0500-N | 127 | 116.08 | 346.73 | 3.18 | 8.89 | 5 | 0.76 | 4.78 | 60.73 | gap |
JBT-130 | 130 | - | 525-635 | 3 | 4.7 | 6 | 0.87 | 6.33 | - | gap |
Factory introduction:
The company has successfully passed ISO9001 and IATF16949 quality management system certification. Our wave springs and spiral retaining rings are mainly used in aerospace, automobile, petroleum, medical equipment, wind energy, construction machinery, consumer electronics and other industrial products .
Contact Person: Mrs. Janet
Tel: 0086-18957716162
Fax: 86-577-62606162
C Series Multi Turn Wave Springs - Inch Plain ends
Nested Wave Springs Multi Turn Wave Springs - Inch Plain ends
LS Series Wave Springs Inch Linear Springs
Custom Stainless Steel Linear Wave Springs for Toys , Size 5mm-1000mm
Square Wire Constant Section Retaining Rings With Radial Pinch Installation / Removal Provisions
Rectangle Section Wire Snap Rings For Automotive OEM / ODM Available
No Custom Tooling Charges Wire Snap Ring With ISO9001 TS16949 Certificate